HANS
System Hans S 3.7 Photovoltaic

Preis auf Anfrage
Article number Hans S 3.7 PV

Hans S 3.7 PV

(Base)

The Hans PV storage package combines a MPPT solar charge controller and an inverter / charger in a single device. The installation of the device is simple and only a little wiring is necessary.
The inverter works in such a way that the maximum possible electrical energy is stored in the batteries and self-consumption can be ensured up to 100%. Depending on the operating point, this energy is stored in the battery, or provided for self-consumption. As soon as the energy supply of the power generation plant is no longer sufficient, the required residual power from the battery is fed into the household grid. The inverters were developed for commercial use. The development was uncompromisingly aimed at an inverter with a clean sine wave output and high efficiency.

Rated voltage: 220 V ~, 1 / N / PE
Discharge capacity AC (25 ° C): max. 2,400 W
Charging capacity AC (25 ° C): max. 1,900 W
PV power: max. 4,000 W
Open circuit voltage: max. 250V
Dimensions: 506 x 275 x 237 mm
Weight: 26 kg
Mounting type: wall mounting

The energy storage 7.0 stores electrical energy in its electrochemical cache. This energy can then be retrieved at a later date to balance the daily difference between power generation and power consumption. Thanks to the modular system, the required storage capacity can be put together flexibly.
- 6.8 kwh 5000 cycles 80% DoD
Dimensions (LxHxD) 638 x 421 x 487 mm
- Weight 95 kg
- Safety VDE-AR-E 2510-50, VDE-AR-E 2510-2, DIN EN 62619 (standard)

Incl. Current sensor and communication center of your installation. Communicate with all components of your system You can use your smartphone to monitor real-time data and change settings via our free Victron Remote Management Portal.

Hans Memory 7.0

The energy storage 7.0 stores electrical energy in its electrochemical cache. This energy can then be retrieved at a later date to balance the daily difference between power generation and power consumption. Thanks to the modular system, the required storage capacity can be put together flexibly.
• Energy content 6.74 kWh
• Rated voltage 55.5V
• Capacity 121.5 Ah
• Maximum charging current 90 A
• Maximum discharge current 300A
• full cycles 5000
• self-discharge about 2% per year
• Protection class IP21
• Dimensions (LxHxD) 638 x 421 x 487 mm
• Weight 95 kg
• Safety VDE-AR-E 2510-50, VDE-AR-E 2510-2, DIN EN 62619 (standard)

 

+ PV modules 5.8 kWpeak

Rated power: 16 pieces to approx. 300 W
Power tolerance: -0 / + 5 W
Length x width x height: 1666 x 992 x 35 mm
Cell material: polycrystalline
IP class: IP 67
Efficiency (STC): 16.90%
Plug type: Cables 0.9 m long with conductor cross-section of 4 mm2 with Multi-Contact (MC 4)
Weight: 18.6 kg

+ Mounting system accessories

Arrangement: 2 rows of 7 modules (vertically mounted)
Arrangement: 1 row of 2 modules (vertically mounted)
Mounting system for pitched roof with brick roofing (Frankfurter Pfanne or similar)
HELUKABEL SOLARFLEX®-X H1Z2Z2-K 6 qmm black 50m solar cable
2x piece plug and socket

Information on request

0 stars based on 0 reviews
* Incl. tax Excl. Shipping costs
By using our website, you agree to the usage of cookies to help us make this website better. Hide this message More on cookies »